The A-16II Personal Mixer is an updated version of the original A-16 Personal Mixer, part of the Personal Monitor Mixing System. The A-16II Personal Mixer features newly designed higher voltage and higher current output circuitry. The new ...

The MT-1 mounts with three screws to the bottom of a Personal Mixer or A-16CS Control Surface. It can mount on any standard mic stand. With an optional right-angle bracket, you can mount an A-16 Personal Mixer on an existing mic or music ...

The EB-1 Extension Bracket allows all Aviom Personal Mixer products to mount to the shaft of standard mic or music stands. The right-angle bracket is designed to be used with the MT-1 Mic Mount.

The PS120 can be used as a replacement power supply for: AN-16/I (TRS or EB version)AN-16/OA-16IIA-16A-16RA-16DA-16TSpecifications Input Voltage: 100-240 voltsOutput: 24VDC, 0.5APolarity: Outer=negative, Inner=positive

1/4" stereo headphones/output jack for Aviom A16II personal monitor.

Tact (push) switch for Aviom A16II personal mixer. Plastic button not included, see Button Repair Kit

Each A-16D Pro accepts one Pro16 A-Net input signal and provides nine parallel outputs, using rugged EtherCon connectors and standard Cat-5e cables. The A-16D Pro provides isolated (floating ground) DC power through the eight A-Net Outs; ...

These A-Net-certified Cat-5e cables can be used with any Pro16 or Pro64 gear. They feature standard RJ45 connectors on each end that can accept the Neutrik NE8MC EtherCon connector for heavy duty applications.Note: The Neutrik NE8MC ...

The A-16R is a rack mounted version of the original A-16 Personal Mixer. Any combination of A-16 Personal Mixers and A-16R rack mounted Personal Mixers can be combined to create a personal monitoring system.The A-16R retains all the ...

The Y1 card is a digital input module that allows users of Yamaha digital mixers to add the power of Aviom’s A-Net™ protocol to their existing systems, distributing audio via inexpensive Cat-5e cable to the A-16II Personal ...

With one A-Net input and eight parallel A-Net outputs, the A-16D provides a low-cost way to replace daisy-chain connections with star configurations. The A-16D is also capable of distributing DC power out any of the eight A-Net Out jacks, ...

The AN-16/i provides 16 balanced line-level inputs into a Pro16 system. Audio is converted to digital and transmitted via A-Net, up to 500'/150m over Cat-5e. A dedicated audio thru is available for each input channel, allowing the AN-16/i ...

Button Repair Kit from Aviom for A16 and A16II Personal Monitor Mixing System

The Mix1 mixing system is the perfect way to get started with Aviom personal mixing. It features one AN-16/i Input Module, which accepts up to 16 line-level input sources, as the head-end of the system. Audio is converted to digital and ...

The Mix4 is a complete monitor mixing solution for four performers. The system includes an AN-16/i line-level input module which accepts up to 16 line-level inputs. Audio is converted to digital and transmitted via A-Net®, up to ...

The AN-16/i-M is a 3U-high rack-mounted mic- and line-level input device with sixteen high-quality microphone preamps and 24-bit A-to-D converters. Each channel contains a three-segment level meter, a continuously variable gain knob, a ...

The Mix6 is a complete monitor mixing solution for six performers. The system includes an AN-16/i line-level input module which accepts up to 16 line-level inputs. Audio is converted to digital and transmitted via A-Net®, up to ...

Encoder for A16 II

Personal Mixer Button & Knob Repair Kit For A-16II/R/CS

The AN-16/o v.4 Output Module is a 1U rack-mount 16-channel digital-to-analog converter for Pro16 digital snake and audio distribution systems. Digital audio transmitted to the AN-16/o v.4 via Aviom's A-Net Pro16 digital audio transmission ...