Gooseneck clip designed primarily for use on drums.  Works with D series, Micro D series, and most other mics.  Will work with all other mic clips using a 5/8" thread.  Included with all D series drum packs.

25' 3.3mm Flexible Jacket Black Cable for Audix Micros with Mini-XLR Male - XLR Female

The MicroBoom is available in two models, the MICROBOOM-50, which is 50" long and the MICROBOOM-84, which is 84" long. They are each made from a carbon fiber rod that can be utilized with any of the condenser microphones in the Micros ...

Minimum Stand Height: 12.8" Maximum Stand Height: 21" Net Weight: 6.5 lbs Finish: Black

An innovative micing solution for guitar amps and cabinets Allows for precise positioning Simple, elegant, compact and easy to use No tools required Adjustable, tension held Mic arm hand tightens firmly into position Holds ...

The M1250B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1250B, which is equipped with a cardioid capsule, ...

Mic stand adapter with thumbscrew and wing nut adjustments.

This is a miniaturized condenser microphone with a fully integrated preamp and detachable cable with complete RFI immunity and equipped with a hypercardioid capsule.Its applications include use as an overhead mic for choir/group vocal, ...

Hanging clip for Micros Series - transparent. Also fits ADX40.

The MicroBoom is available in two models, the MICROBOOM-50, which is 50" long and the MICROBOOM-84, which is 84" long. They are each made from a carbon fiber roc that can be utilized with any of the condenser microphones in the Micros ...

Heavy duty snap on clip with tension fit for D-Series, SCX series, ADX50 and TR40 microphones. Uses standard 5/8" threads and also includes a 3/8" thread adapter for European stands.

The M1255B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, is designed with a very high sensitivity for distance miking. Applications include ceiling mount or table mount for conferencing, overhead ...

The MicroBoom™ is a 84-inch (2133 mm) carbon fiber rod that can be utilized with any of the condenser microphones in the Micros series. Lightweight and able to attach to any microphone stand, the MicroBoom™, is a problem solver ...

The TM1 is a 6mm pre-polarized condenser microphone used for test and measurement applications. The TM1 is known for its linearity, accurate response, consistency, easy of use and affordability. Characterized with a uniformly controlled ...

Mic Stand Adapter for Audix Micros and ADX40

The D6 is a dynamic cardioid mic with pre-emphasized bass response for ground-shaking lows.  Made for kick drums (or any other instrument requiring precise low frequency reproduction), the D6 has a frequency response of 30Hz-15kHz and ...

The design of the OM-5 was in response to the market's demand for a super high-output mic with natural, undistorted sound. Unlike other brands using "neodymium: magnets and having unnatural sound and excessive feedback, the OM-5 does not ...

The OM2 is an American-made, hand held vocal microphone designed primarily for live performance. Characterized with a hypercardioid pickup pattern and a frequency response of 50-16k Hz, the OM2 has the same well-balanced, comfortable ...

The M1280B, a miniaturized condenser microphone with a fully integrated preamp and detachable cable, has complete immunity from RF interference caused by cell phones and GSM devices. The M1280B, which is equipped with a cardioid capsule, ...

The MicroBoom™ is a 50-inch (1270 mm) carbon fiber rod that can be utilized with any of the condenser microphones in the Micros series. Lightweight and able to attach to any microphone stand, the MicroBoom™, is a problem solver ...