PB 4x4 features ART's "4x4" distribution on the back of the unit -- four of the eight rear outputs are 1.25 inches apart. This allows the user to plug in wide power cables and multiple wall wart devices, and still have eight total power ...

The S8 can be used to split eight balanced low impedance microphone signals into sixteen (eight pairs).Each channel of the S8 provides one direct output and one transformer-isolated output from a single microphone. Applications incude ...

The PS8 PRO provides controlled power sequencing to 8 rear AC outlets. Each output is delayed by a fixed amount that is determined by the front panel Sequency Delay control. This allows you to control the power up and down sequence in a ...

“Hum” in an audio system is often caused by loop effects which act like antennas. These loops can easily pick up a 60 Hz (or higher harmonics) hum transmitted by electrical wiring. Typically, these loops are connected via ...

The DTI (Dual Transformer/Isolater) is a high quality totally passive audio interface that uses a pair of high performance transformers to totally separate input and output signal grounds, thereby isolating two systems and reducing hum and ...

The T8™ (Transformer Eight) a high quality totally passive audio interface that uses 8 transformers to separate input and output signal grounds, thereby isolating two systems and reducing hum and ground-loop noise. The T8’s ...

The Phantom II Pro is designed to do one thing and do it well. It provides clean, reliable phantom power for one or two condenser microphones in a rugged, compact, and portable unit. Innovative low power circuitry generates the higher ...

The ProSplit provides one direct output and one transformer isolated output from a single microphone. Applications include sending the direct output to the main or Front-Of-House mixer, with the second isolated output being sent to a ...

Different condenser microphone specify different amounts of required phantom power. As a rule these ratings can range from 48 volts all the way down to 9 volts. Fortunately, there is some flexibility in terms of matching phantom voltage to ...

The SP 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source.The SP 4x4 also features ART's "4x4" distribution on the back of the unit ...

The S8-3WAY eight channel three way microphone splitter is ideal for live sound, recording and broadcast applications where microphone and XLR balanced line level input signals have to go to multiple mix locations.Each channel provides one ...

Multi-Metered Power Conditioner and Light ModuleThe PS 4x4 features a backlit linear meter to monitor input voltage, which gives the user a familiar analog style readout when monitoring voltage from a power source.Additionally, the PS 4x4 ...

12VDC power adapter desinged for use with the USB Phono Plus preamplifier/audio interface.

Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection ...

Power supply for Phantom II120V 60Hz DC12V 150Ma Max1.8W

The PR8 PRO regulates incoming AC line voltages to deliver clean and stable power to your system for optimum operation and longer life. Output voltage at any of the 8 rear AC outlets is maintained within 5 volts of 117 volts even as the ...

Built on the foundation of the popular 4x4s, the PRO SERIES are durably constructed, reliable power conditioners for use in many applications. Wherever power management system is required, the 4x4 PRO SERIES provide the surge protection ...

Use the SPLITCom Pro to split or combine balanced low impedance microphone signals.As a splitter:The SPLITCom Pro provides one direct-coupled output and one isolated output from a single microphone. Applications include sending the direct ...