A more compact version of the classic 210/2. The combination of the long-legged 201 A/2 mic stand and the 211/1 telescopic boom arm. Like the 210/2, the 210/9 sets the standard for professional microphone boom stands.Specifications: ...

Modern update of the classic 210/2. Zinc die-cast base with long folding legs. Special height-adjustment mechanism.Specifications: Height: 36.42 - 64.17" Boom Length: 31.69" Weight: 6.61 lbs.

Stand adapter for straight shaft mics.Standard on: C391 C414XLII/ST C414XLS/ST C430 C451B V480B C568B D112 D190 Se300Optional for: AMD E, ESP and GN modules C414 XL II C 414 XLS CGN 99 C/S CGN 99 H/S GN 15/30/50 E ...

Knurled knob bolt for AKG and K&M KM210 and KM211 boom arm extensions.

Thread adapter. 5/8” female to 3/8” male.

The flexible microphone bar for microphone stands. Two moveable bars position the microphone where ever you would like it. Each bar is fitted with a captive knurled screw. The entire bar can be screwed onto all standard microphone stands ...

Extra long adjustable two-section boom. Noiseless adjustment and non-marring locking assembly. Available in matte black finish.Specifications: Boom Length: 22.5/38.25"Weight: 2 lbs.

Extra low profile tripod floor stand for bass drums or special use. One-piece pole with cast iron base. Complete with boom. Available in matte black finish.Specifications: Height: 11.02" Boom length: 16.73"-28.54" Net weight: 6.17 lbs.

1/8" Female - 1/4" Male screw on adapter for many AKG headphones.

All installation modules except LM 3 feature a status LED ring normally powered off the phantom supply voltage. When the microphone has been correctly connected and the system and phantom power switched on, the LED ring will glow at medium ...

Replacement ear pad for AKG K240S, K241 and K270S headphones.  Sold individually.  See also 2260Z0901 foam disc.

12-in. (30-cm) gooseneck with integrated XLR phantom power adapter for temporary installation. All installation modules except LM 3 feature a status LED ring normally powered off the phantom supply voltage. When the microphone has been ...

The B 29 L powers one or two C 4.. L version MicroMic III Series microphones (except for the D 409 L which requires no phantom power). The B 29 L features an on/off switch and status LED as well as a mic/line selector for matching the ...

Heavy-duty tripod floor stand similar to the AKG KM 201A/2, but with three-sections. Noiseless clutch. Matte black finish. Height: 23/53". Weight: 5 lbs.

For the new C 414 B-XLS and C 414 B-XL II microphones, AKG designed a new shock mount that differs from the familiar H 100 as follows: The outside ring has been reduced in diameter from 120 mm (4.7 in.) to 100 mm (4 in.). The color has ...

Low-level, telescopic stand with foldable legs. Comes with 2-piece boom arm. Height: 16.73" - 25.39" Boom Length: 18.5" - 30.51" Weight: 4.85 lbs

All-metal stand. Consists of tubing assembly, boom arm and zinc die-cast base with long folding legs. Square swivel joint with large wing nut. Weight: 5.5 lbs Height: 39.76"/67.72" BL: 31.7"

Short one-piece boom arm with 3/8" thread. Locking washer and plastic grip. Smooth adjustment. Easy to tighten with wing nut. Boom Length: 15.55" Weight: 1.1 lbs

Foam disc (behind ear pad) for AKG K240, K240M and K240DF headphones.

Classic two-piece telescopic boom artm with 3/8" thread. Silent, scratchless swivel joint for adjustment of angle, easy tightening with T-bar locking screw. Specifications: Boom Length: 18.5" - 30.31" Weight: 1.76 lbs.