Product Overview
Communication is the cornerstone of success. Plant your cornerstone on solid ground with the elegantly advanced Shure Microflex Ecosystem. Offering a complete portfolio of networked A/V solutions, Microflex conference systems can be tailored to deliver the best collaboration experience in any application. From array microphones that capture up to eight zones with voice localization to dedicated system signal processing and wireless options. Choose the Microflex system that fits your current needs, and as your enterprise evolves, Microflex will change and grow with you. Plus, with associated technology partners like Cisco Microsoft Teams, Zoom, Logitec, Audinate, and more, Microflex delivers seamless integration and operation with the most used hardware and software collaboration tools, control systems, and mounting hardware available.
The 714P+HCAM-V bundle consists of one 4-foot linear array microphone, four ceiling speakers with tile bridges, a Huddly IQ conference camera, and an IntelliMix P300 conference audio processor.
Note: Customer must have certification in order to purchase bundles and/or products within the Microflex line. Please contact your Full Compass sales pro with any questions.
Shure 714P+HCAM-V Includes:
- 1 x P300 IntelliMix conferencing audio processor
- 1 x MXA710-4F linear array microphone
- 4 x MXN5W-C ceiling speaker
- 4 x MXN5-TB tile bridge mount
- 1 x Huddly IQ conference camera
- 1 x Huddly IQ mount bracket
- 1 x HDMI cable
Shure 714P+HCAM-V Features:
- IntelliMix P300
- Connects 10 Dante audio inputs, 2 analog inputs, USB, and a mobile device to an AV conferencing system or a PC-based videoconferencing application
- Includes Shure-developed DSP algorithms to enhance audio quality in AV conferences: 8 channels of microphone processing featuring AEC, noise reduction, and automatic gain control, IntelliMix automatic mixing, matrix mixing, delay, compressor, and PEQ
- Flexible signal routing and connectivity: analog audio (2 block in / 2 block out) to connect to room AV conferencing system; USB (1 in/out) to connect to a laptop or room PC; one 3.5 mm TRRS jack to connect to a mobile device to enable an additional participant to join
- Power-over-Ethernet (PoE+) eliminates the need for an outboard power supply
- Compact form factor is easy to mount without an equipment rack
- MXA710
- Steerable Coverage™ technology to capture audio anywhere in the room (up to 4 lobes with a 2-foot array, 8 lobes with a 4-foot array)
- Autofocus technology fine-tunes each lobe position in real-time, even if meeting participants lean back or stand up.
- Default room coverage template enables quick and easy lobe optimization for wall, ceiling, or table installations.
- IntelliMix DSP includes automatic mixing, acoustic echo cancellation, noise reduction, and automatic gain control.
- Shure Designer System Configuration software for easy setup and configuration
- SystemOn Audio Asset Management software for remote management and troubleshooting
- PoE powered
- MXN5W-C
- SystemOn Audio Asset Management software for remote management and troubleshooting
- Shure Audio Encryption
- Dante Domain Manager compatible
- AES67 compatible
- Pre-tuned frequency response optimized for voice intelligibility in AV conferencing applications
- Low-profile, shallow-can design compatible with most drop ceiling installations
- 2-way driver system with 5.25 in (13.3cm) woofer
- PoE/PoE+ enabled, eliminating the need for an outboard amplifier
- Huddly IQ
- Wide-angle lens
- Genius framing
- Gallery view
- Digital tilt/pan/zoom
- Software upgradeable
- Image enhancement
- Portrait lighting
- 180° Auto-Flip
Shure 714P+HCAM-V Specifications:
- IntelliMix P300
- Input: (2) 3-pin block connector (Active Balanced)
- Output: (2) 3-pin block connector (Impedance Balanced)
- Mobile: (1) TRRS 3.5 mm (1/8")
- USB Connections
- (1) USB 2.0, Type B: Single port carries 2 input and 2 output channels (Summed mono)
- Network Connections: (Dante Digital Audio) (1) RJ45: 10 Dante Inputs , 8 Dante Outputs
- Polarity: Non-inverting, any input to any output
- Power Requirements: 802.3 at Type 2 (PoE Plus), Class 4
- Power Consumption: 17.5 W, maximum
- Weight: 1710 g (3.8 lbs)
- Dimensions H x W x D: 4 x 21 x 22.6 cm (1.6 x 8.3 x 8.9 in.)
- Control Software: Shure Designer
- Operating Temperature Range: −6.7°C (20°F) to 50°C (122°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Frequency Response +1, -1.5 dB: 20 to 20,000 Hz
- Dante Digital Audio
- Sampling Rate: 48 kHz
- Bit Depth: 24
- USB Audio
- Sampling Rate: 48 kHz
- Bit Depth: 16, 24
- Latency (Does not include Dante latency)
- Firmware 4.1 and newer
- Dante 1-8 in to Dante out (AEC enabled): 15.4 ms
- Dante 1-8 in to Dante out (AEC disabled): 8.7 ms
- Dante 9-10 in to Dante out: 3.4 ms
- Analog in to Analog out: 3.8 ms
- Firmware 3.1 and older
- Dante 1-8 in to Dante out (AEC enabled): 12.5 ms
- Dante 1-8 in to Dante out (AEC disabled): 5.8 ms
- Dante 9-10 in to Dante out: 1.8 ms
- Analog in to Analog out: 2.2 ms
- Analog Connections (Block Connectors)
- Dynamic Range 20 Hz to 20 kHz, A-weighted, typical
- Analog-to-Dante: 113 dB
- Dante-to-Analog: 117 dB
- Equivalent Input Noise 20 Hz to 20 kHz, A-weighted, input terminated with 150Ω
- Line: -86 dBV
- Aux: -98 dBV
- Total Harmonic Distortion @ 1 kHz, 0 dBV Input, 0 dB analog gain:
- Common Mode Rejection Ratio 150Ω balanced source @ 1 kHz: >50 dB
- Input Impedance: 9.6 kΩ
- Input Clipping Level
- Line: +27 dBV
- Aux: +15 dBV
- Output Impedance: 80 Ω
- Output Clipping Level
- Line: +20 dBV
- Aux: +0 dBV
- Mic: -26 dBV
- Networking
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
- MXA710
- Lobe Width, Adjustable
- Narrow: 30 degrees
- Medium: 40 degrees
- Wide: 70 degrees
- Connector Type: RJ45
- Power Requirements: Power over Ethernet (PoE), Class 0
- Power Consumption: 10 W maximum
- Weight
- MXA710-2FT: 2 lbs (0.91 kg)
- MXA710-4FT: 3.7 lbs (1.67 kg)
- Control Software: Shure Designer
- Plenum Rating: UL2043 (Suitable for Air Handling Spaces)
- Dust Protection: IEC 60529 IP5X Dust Protected
- Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Audio
- Frequency Response: 100 Hz to 20 kHz
- AES67 or Dante Digital Output
- Channel Count
- MXA710-2FT: 6 total channels (4 independent transmit channels, 1 Automix output, 1 AEC reference in channel)
- MXA710-4FT: 10 total channels (8 independent transmit channels, 1 Automix output, 1 AEC reference in channel)
- Sampling Rate: 48 kHz
- Bit Depth: 24
- Sensitivity at 1 kHz
- MXA710-2FT: -7.4 dBFS/Pa
- MXA710-4FT: -7.9 dBFS/Pa
- Maximum SPL Relative to 0 dBFS overload
- MXA710-2FT: 101.4 dB SPL
- MXA710-4FT: 101.9 dB SPL
- Signal-To-Noise Ratio Ref. 94 dB SPL at 1 kHz: 71.2 dB A-weighted
- Latency, Does not include Dante latency
- Direct Outputs: 8.7 ms
- Automix output (Includes IntelliMix processing): 19.3 ms
- Self Noise
- MXA710-2FT: 22.9 dB SPL-A
- MXA710-4FT: 22.8 dB SPL-A
- Built-in Digital Signal Processing: Automatic mixing, Acoustic Echo Cancellation (AEC), Noise Reduction, Automatic Gain Control, Compressor, Delay, Equalizer (4-band Parametric) , Mute, Gain ( 140 dB range)
- Acoustic Echo Cancellation Tail Length: Up to 250 ms
- Networking
- Cable Requirements: Cat 5e or higher (shielded cable recommended)
- MXNW-C
- Connector Type: RJ45
- Power Requirements
- Power over Ethernet (PoE): Class 0 or PoE Plus Class 4
- Power Consumption
- Power over Ethernet (PoE): 12 W maximum (11 W typical)
- PoE Plus: 24 W maximum (23 W typical)
- Weight: 6.5 lbs (2.95 kg)
- Product Dimensions: 12 x 12 x 4 in. (304.8 x 304.8 x 101.6 mm) H x W x D
- Control Software: Shure Designer
- Plenum Rating: UL 2043 (Suitable for Air Handling Spaces)
- Operating Temperature Range: −6.7°C (20°F) to 40°C (104°F)
- Storage Temperature Range: −29°C (-20°F) to 74°C (165°F)
- Frequency Response (-3 dB): 120 Hz to 20 kHz
- Maximum Output Level At 1 meter
- Power over Ethernet (PoE): 92 dB SPL
- PoE Plus: 98 dB SPL
- Coverage Angle Average of 1-octave band centered on 4 kHz: 94°
- Digital Signal Processing: Delay, Limiter, Signal Generator, Equalizer (4-band Parametric)
- Latency Not including Dante latency: 1.5 ms
- Huddly IQ
- Image
- 12 Megapixels 1/2.3” CMOS sensor
- 1080p Full HD @ 30 fps
- 720p HD @ 30 fps
- 16:9 aspect ratio output
- UVC 1.1 plug-and-play compatible
- Optics
- Ultra-wide angle glass optics
- Horizontal field of view 120˚•
- Vertical field of view 90˚
- Diagonal field of view 150˚
- f/2.8 aperture
- Connectivity
- USB Type-C connector
- SuperSpeed USB 3
- Power requirement 5V 900mA
- System & Hardware Requirements
- Any operating system with built-in USB
- plug-and-play support, including Windows 10 or later, macOS
- Hardware
- 5-element beamforming microphone array (optional)
- Aluminum unibody construction
- High-performance video processing engine
- Neural compute engine
- Embedded mounting hinge
- Camera tripod mount Color Matte Black
