German Light Products Impression E350 350W LED Engine w/ 2 Gobo Wheels, Animation Wheel, CMY Mixing

Part of German Light Products' impression 350 range, the impression E350 features a higher color temperature than its partner fixtures at 7,500 K. Emitting an even and flat field with a considerable light output of up to 12,200 lumens, GLP's E350 produces stunningly bright projections. Massive mid air flexibility is created by the fast and responsive iris plus a 7:1 ratio zoom of 8.5°- 42°. Plus the impression E350 features a full range of color options from the dichroic CMY color mixing system with separate virtual color temperature control, along with an additional 10 slot color wheel that features split colors and continuous rotation effects. Beam effects, on the other hand, start with a completely new gobo design set across two independent wheels, a 7 position rotating and indexing wheel supplemented with a fixed 10 position gobo wheel, that are supported by a fully controllable animation wheel that can cross completely into the beam and be rotated in both directions with orientation shifts from horizontal to vertical. Add the independent 8 facet rotating prism and take any of your projections to a whole new level. Plus, included are both a soft and heavy frost filter system inside for added flexibility. Bringing the E350's LED engine some even cooler effects is the matrix control that has smooth 16-bit movement, full range dimming with no color shift, and adjustable pulse width modulation. This lightweight fixture also features a built-in battery for fixture setup, an auto sensing power supply and the option to have wireless DMX control.

Note: The impression E350 is not suitable for household use, for use in any location where unattended children have access to it, or for use in permanent outdoor installations.

Features

• 350 W white light LED engine; 20 000 hour lifetime
• Control panel on the side of the yoke has a backlit graphic LCD display for setting up the fixture and changing fixture settings
• Compatible with DMX 512 and RDM control protocols; DMX over an Art-Net or sACN network too
• Pan through 640° and tilt through 262°; with coarse and fine control channels and self-correcting position feedback
• 0-100% continuous CMY color mixing
• 10-slot color wheel with ten dichroic color filters including CTC
• Adjustable color temperature using CTC DMX
• Rotating gobo wheel; 7 gobos + open
• Fixed gobo wheel; 10 gobos + open
• Animation wheel; variable speed, direction and angle
• Two modes for the 4 blade framing module with individual blade control; PI (position/indexing) and LR (left/right)
• 2 levels of frost; light and continuously variable medium
• 0 – 100% continuous dimming; 2 dimming curves: linear and extra soft (default)
• 1:5 zoom range; beam angle from 42° to 8°
• 8-bit and 16-bit focus adjustment
• Four available focus tracking settings: off, near, medium and far
• Four different cooling fan modes; regulated, constant high, constant medium, constant low
• Three different settings for the movement speed (pan/tilt, color wheel, zoom, focus, etc.); normal, fast, smooth
• Adjustable LED dimming PWM frequency to avoid flicker and beat frequencies in video images; 2200 Hz,
• 3000 Hz (default), 4800 Hz, 9600 Hz or 25 kHz
• Various rigging options; 2 eyelets provided for safety cable attachment

Specifications

• Light Source:
  • Lamp type: LED 350 W
  • Lifetime: 20,000 h
  • Light output:
    • Narrow: 9,759 lm
    • Medium: 12,084 lm
    • Wide: 12,269 lm
  • Color temperature: 7,500 K
  • CRI: 77
  • TLCI (Qa): 57
  • CQS: 90
  • Rg: 96
  • Rf: 87
• Optical System:
  • Movement:
    • Pan: 640°
    • Tilt: 262°
  • 16 bit resolution with feedback
  • Zoom: 7° - 42°
  • Focus: motorized 2m – infinite
• Effects:
  • Dimmer: 3-D dimming algorithm
  • Shutter: electronic shutter
  • Prism: 8 facet; rotating
  • Gobo wheel 1: 7 gobos + open
  • Gobo wheel 2: 10 fixed gobos + open
  • Frost: 2 variable filters for light and heavy frost
  • Animation wheel: Rotation and orientation control
  • Color wheel: 10 color filters + open
  • Full CTO: 3,200 K
  • 1/4 CTO: 4,600 K
  • CTB: 9,000K
  • Color mixing: CMY color mixing
• Power: (Watt @ 230V): 550W
• Connectors:
  • DMX data:
    • XLR 5-pin in/out
    • XLR 3-pin in/out
  • Mains power: Neutrik True1 Input
• Maximum ambient temperature: 115°F (45°C)
• Mounting Options:
  • Any orientation
  • Upright: removable tripod base (supplied) with brackets for ratchet belt
  • Hanging: 2 x M10 socket for half coupler, or other clamp
  • Omega brackets (optional)
  • 2 attachment points for safety wire
• Dimensions (LxWxH) head vertical: 18.6″ x 9″ x 24.3″ (47.2 x 22.9 x 61.8 cm)
• Weight: 54 lbs (24.5 kg)